OOK Professional Picture Hanger 10 lb. 4 pk Steel (Pack of 12)

ZORO SELECT U63266.050.0001 240 lb Tension Strength, 2-3/4" L, Steel, 10 PK

Channel Toggle Anchor, Toggle Anchor Type Toggle Bolt Anchor, System of Measurement Inch, Anchor Diameter 3/4 in, Thread Size 1/2 In.-13, Overall Length 6 in, Screw Size 1/2 in, Screw Length 3 in, Thread Length 2 3/4 in, Drive Type Combination... ... more

604-2RS Deep Groove Ball Bearing 4x12x4mm Double Sealed GCr15 Bearings 10pcs - 10 Pack - 604-2RS (4*12*4)

NOTE£º Please refer to the picture and select right type of bearings before your order (Sealed or Shield on BOTH or SINGLE side of the bearing). Suffix on the bearing just for differentiating between Sealed and Shield type of bearing. ... more

Design House 181529 8-Hole 4-inch x 4-inch 1/4-inch Radius Door Hinge Satin Brass 10-Pack

The Design House 181529 10-Pack Hinge 4" in Satin Brass has a 1/4" radius corner, for use on residential duty wooden doors. These door hinges are made of steel with a staggered hole pattern. Each hinge has 8 holes and measures 4" x 4" x 1/2". ... more

Design House 181669 8-Hole 4-inch x 4-inch Square Corner Door Hinge Satin Nickel 10-Pack

The Design House 181669 10-Pack Hinge 4" in Satin Nickel has a square corner, for use on residential duty wooden doors. These door hinges are made of steel with a staggered hole pattern. Each hinge has 8 holes and measures 4" x 4" x 1/2". ... more

Berta Ball Bearing Full Extension Soft Close Side Mount Drawer Slide, Steel | 1 H x 10 W x 4 D in | Wayfair SLD-SC-4507-10-1

Package Content: 1 Pack Drawer Slides (left and right sides of drawer slides make a total of 1 pack) with Installation Screws. WEIGHT CAPACITY: 100 lb. MOUNTING: Side Mount. MATERIAL: High-Quality Cold-Rolled Steel, COLOR: Zinc Plated. SLIDE LENGTH: 18... ... more

Berta Ball Bearing Full Extension Soft Close Side Mount Drawer Slide, Steel | 1 H x 12 W x 4 D in | Wayfair SLD-SC-4507-12-1

Package Content: 1 Pack Drawer Slides (left and right sides of drawer slides make a total of 1 pack) with Installation Screws. WEIGHT CAPACITY: 100 lb. MOUNTING: Side Mount. MATERIAL: High-Quality Cold-Rolled Steel, COLOR: Zinc Plated. SLIDE LENGTH: 18... ... more

ZORO SELECT U63266.019.0001 Toggle Bolt, 6" L, Steel, 10 PK

Channel Toggle Anchor, Toggle Anchor Type Toggle Bolt Anchor, System of Measurement Inch, Anchor Diameter 1/2 in, Thread Size #10-24, Overall Length 6 in, Screw Size 3/16 in, Screw Length 2 1/2 in, Thread Length 2 1/4 in, Drive Type Combination... ... more

ZORO SELECT 1LAH2 Hex Weld Nut, 1/4"-20, Steel, 1/2 in Wd, 5/64 in Ht, 50 PK

Weld Nut, Material Steel, Finish Black Oxide, Thread Size 1/4 In.-20, Base Height 5/64 in, Base Width 1/2 in, Collar Height 0.4 in, Number of Weld Projections 6, System of Measurement Inch, Base Shape Hex, For Hole Diameter 27/64 in, Pack Size Small... ... more

TE-CO 42611 Flat Washer, Fits Bolt Size 1 1/4" ,Steel Black Oxide Finish, 10 PK

Flat Washer, Flat Washer Type Standard, Dimensional Standards TCMAI standards, Material Steel, Material Grade/Class Not Graded, Finish Black Oxide, For Screw Size 1 1/4 in, Inside Diameter 1.281 in, Outside Diameter 2 1/2 in, Maximum Thickness 0.297... ... more

ZORO SELECT U17122.050.1000 L-Hook, 1/2"-13, 10" L, Carbon Steel Plain, 25 PK

Anchor Bolt, Thread Size 1/2 In.-13, Anchor Diameter 1/2 in, Body Length 10 in, Thread Length 1 3/4 in, Hook Length 1 9/16 in, Thread Type Coarse, Material Steel, Finish Plain, Removable Permanent, Tensile Strength 60,000 psi, Anchor Bolt Type L Hook... ... more

ZORO SELECT U63266.031.0001 240 lb Tension Strength, 2-3/4" L, Steel, 10 PK

Channel Toggle Anchor, Toggle Anchor Type Toggle Bolt Anchor, System of Measurement Inch, Anchor Diameter 3/4 in, Thread Size 5/16 In.-18, Overall Length 6 in, Screw Size 5/16 in, Screw Length 3 in, Thread Length 2 3/4 in, Drive Type Combination... ... more

ZORO SELECT 822350G Grade 8, 3/4"-10 Flange Bolt, Plain Steel, 3-1/2 in L, 10 PK

Flange Bolts, Dimensional Standards ASME B18.2.1, Drive Hex, Drive Size 3/4 in, Fastener Length 3 1/2 in, Finish Black Oxide, Flange Diameter 1 19/32 in, Flange Type Standard, Head Height 47/64 in, Head Width 1 1/8 in, Manufacturer Location Globally... ... more

ZORO SELECT U70651.050.0475 Nail Drive Anchor, Steel 10 PK

Hammer Drive Pin Anchor, Anchor Diameter 1/2 in, Overall Length 4 3/4 in, Thread Size 1/2 In.-13, Thread Length 1 9/16 in, Anchor Material Steel, Pin Material Steel, Finish Zinc Yellow, Head Type Flat, Head Diameter Not Applicable, Head Height Not... ... more

ZORO SELECT Z9187-BEV-H Beveled Washer, Steel, Oiled Finish, 10 PK

Beveled Washer, Flat Washer Type Beveled, Material Steel, Material Grade/Class Case Hardened, Finish Black Oxide, For Screw Size 3/4 in, Inside Diameter 0.781 in, Outside Diameter 1 1/2 in, Maximum Thickness 0.125 in, System of Measurement Inch,... ... more

ZORO SELECT M16180.120.0080 Eye Bolt M12, 12 mm ID, Steel, Plain, 10 PK

Rod End, Eye Inside Diameter 12 mm, Eye Outside Diameter 25 mm, Eye Thickness 14 mm, Black Oxide, Steel, Material Grade/Class Class 4.6, Material Quality Standards DIN 444, Hole Center-to-End Length 80 mm, Shank Diameter 12 mm, Thread Style Partially... ... more

SAMMYS 8268957 SAMMYS Swivel Rod Hanger, Steel, #12-24 Size, 1-3/4" L, Steel

Rod Hanger, System of Measurement Inch, Mount Type Swivel, Screw Size #12, Overall Length 1 3/4 in, Material Steel, Finish Climaseal; Zinc Plated, Drive Type External Hex, Maximum Load Capacity 1,585 lb, Compatible Material Steel, Compatible Rod Thread... ... more

ZORO SELECT U08280.025.0150 Lag Screw, 1/4 in, 1-1/2 in, Steel, Zinc Plated Hex

Hex Head Lag Screw, Material Steel, Finish Zinc Plated, Screw Size 1/4 In., Fastener Length 1 1/2 in, Threads per Inch 10, Thread Style Partially Threaded, Minimum Thread Length 29/32 in, Dimensional Standards ASME B18.2.1, Pack Size Small, System of... ... more

SAMMYS 8139957 SAMMYS Vertical Rod Hanger, Wood, Steel, 1/4"-10 Size, 2" L,

Rod Hanger, System of Measurement Inch, Mount Type Swivel, Screw Size 1/4 in, Overall Length 2 in, Material Steel, Finish Zinc Plated, Drive Type External Hex, Maximum Load Capacity 1,257 lb, Compatible Material Wood, Compatible Rod Thread Size 3/8... ... more

ZORO SELECT 10E725 Round Base Magnet,200 lb. Pull

Lifting and Retrieving Magnet, Material Ceramic, Max. Pull 200 lb, Thickness 0.5 in, Overall Height 1/2 in, Diameter 4 9/10 in, Casing Material Steel, Hole Dia. 1/2 in, Stability Temp. 32 Degrees to 180 Degrees F ... more

KEN FORGING EN-8 Oval Eye Nut, 3/4"-10 Thread Size, 3/4 in Thread Lg, Steel,

Eye Nut, Finish Black Oxide, Material Steel, Thread Size 3/4 In.-10, Thread Length 3/4 in, Eye Shape Oval, Eye Inside Diameter 1 1/2 in, Eye Outside Diameter 2 1/2 in, Overall Height 3 in, Working Load Limit 5,000 lb, System of Measurement Inch, Base... ... more

ZORO SELECT U28100.019.0125 Sheet Metal Screw, #10 x 1-1/4 in, Zinc Plated

Sheet Metal Screw, Head Type Hex Washer, Finish Zinc Plated, Material Steel, Screw Size #10, Fastener Length 1 1/4 in, Head Width 0.362 in, Head Height 0.12 in, Dimensional Standards ASME B18.6.3, For Maximum Material Thickness 1/8 in, Pack Size Small,... ... more

ZORO SELECT U08450.025.0200 Lag Screw, 1/4 in, 2 in, Steel, Hot Dipped

Hex Head Lag Screw, Material Steel, Finish Hot Dipped Galvanized, Screw Size 1/4 In., Fastener Length 2 in, Threads per Inch 10, Thread Style Partially Threaded, Minimum Thread Length 1 1/2 in, Dimensional Standards ASME B18.2.1, Pack Size Small,... ... more

ZORO SELECT 2TJ95 Grade 8, 3/4"-10 Flange Bolt, Plain Steel, 2-1/2 in L, 15 PK

Flange Bolts, Dimensional Standards ASME B18.2.1, Drive Hex, Drive Size 3/4 in, Fastener Length 2 1/2 in, Finish Black Oxide, Flange Diameter 1 19/32 in, Flange Type Standard, Head Height 47/64 in, Head Width 1 1/8 in, Manufacturer Location Globally... ... more

SAMMYS 8015925 SAMMYS Vertical Rod Hanger, Wood, 1/4 in Size, 3" L, Steel

Rod Hanger, System of Measurement Inch, Mount Type Vertical, Screw Size 1/4 in, Overall Length 3 in, Material Steel, Finish Zinc Plated, Drive Type External Hex, Maximum Load Capacity 2,275 lb, Compatible Material Wood, Compatible Rod Thread Size 1/2... ... more

SAMMYS 8013925 SAMMYS Vertical Rod Hanger, Wood, 1/4 in Size, 2" L, Steel

Rod Hanger, System of Measurement Inch, Mount Type Vertical, Screw Size 1/4 in, Overall Length 2 in, Material Steel, Finish Zinc Plated, Drive Type External Hex, Maximum Load Capacity 1,760 lb, Compatible Material Wood, Compatible Rod Thread Size 1/2... ... more

TAMPER-PRUF SCREWS 490630 1-1/2 in Torx Flat Tamper Resistant Screw, Steel,

Tamper Resistant Screw, Head Type Flat, Finish Zinc Plated, Material Steel, Screw Size #10, Fastener Length 1 1/2 in, Head Width 0.385 in, Head Height 0.109 in, Drive Size T20, Dimensional Standards ASME B18.6.4, Pack Size Small, System of Measurement... ... more

Design House 181644 8-Hole 4-inch x 4-inch Square Corner Door Hinge Satin Brass 10-Pack

The Design House 181644 10-Pack Hinge 4" in Satin Brass has a square corner, for use on residential duty wooden doors. These door hinges are made of steel with a staggered hole pattern. Each hinge has 8 holes and measures 4" x 4" x 1/2". ... more

CROSBY 1048840 Swivel Hook,Alloy Steel,10,000 lb.,Gold

Slip Hook, Hook Type Slip Hook, Working Load Limit 10,000 lb, Lifting Capability For Lifting, Grade 100, Material Alloy Steel, Material Thickness 3/4 in, Hook Opening Width 2 in, Overall Length 9 3/4 in, Usable Length 7 1/2 in, Overall Width 4 7/8 in,... ... more

ULLMAN HT-3 Pick-Up Tool,Mag,8.25 to 30.25 In,10 lb

Magnetic Retrieval Tool, Compatible Thickness - Maximum 7/8 in, Compressed Length 8 1/4 in, Extended Length - Maximum 30 1/4 in, Flexibility Flexible, Handle Material Stainless Steel, Handle Style Cushioned, Head Diameter 1/2 in, Jaw Capacity 1 in,... ... more

CROSBY 1022260 Eye Hook,Carbon Steel,10,000 lb.,Red

Sling Hook, Hook Type Sling Hook, Working Load Limit 10,000 lb, Lifting Capability For Lifting, Grade 100, Material Carbon Steel, Material Thickness 29/32 in, Hook Opening Width 2 1/2 in, Usable Length 7 3/8 in, Overall Width 6 1/4 in, Eye Inside... ... more

ZORO SELECT 1WE59 Sheet Metal Screw, #10 x 3/4 in, Plain 18-8 Stainless Steel

Tapping Sheet Metal Screw, Head Type Hex Washer, Finish Plain, Material 18-8 Stainless Steel, Screw Size #10, Fastener Length 3/4 in, Head Width 0.313 in, Head Height 0.12 in, Dimensional Standards ASME B18.6.4, SAE J933, Pack Size Small, System of... ... more

TAMPER-PRUF SCREWS #0192 1/4"-20 x 1/2 in Tri-Groove Round Tamper Resistant

Tamper Resistant Screw, Head Type Round, Material Steel, Finish Zinc Plated, Drive Tri-Groove, Thread Size 1/4 In.-20, Fastener Length 1/2 in, Head Width 0.37 in, Head Height 0.148 in, Drive Size #10, Pack Size Small, Type Tamper Resistant Screw,... ... more

ZORO SELECT 1XMY9 Door Hanger Kit, 4-1/2"L, 2 PK

Door Hanger Kit, Sliding Door Box Rail, Max. Weight (Lb.) 450 lb, Steel, -, Zinc Finish, Length (In.) 4 1/2 in, Height (In.) 10 5/16 in, Width (In.) 1 9/16 in, Depth (In.) -, Max. Wheel Dia. (In.) -, Roller Width/Dia. (In.) No Roller, - Mounting,... ... more

Design House 181545 8-Hole 4-inch x 4-inch 1/4-inch Radius Door Hinge Satin Nickel 10-Pack

The Design House 181545 10-Pack Hinge 4" in Satin Nickel has a 1/4" radius corner, for use on residential duty wooden doors. These door hinges are made of steel with a staggered hole pattern. Each hinge has 8 holes and measures 4" x 4" x 1/2". ... more

DAYTON 5WRR5 Chain,Grade 80,1/2 Size,10 ft,12,000 lb.

Straight Chain, Chain Type Not Applicable, Material Alloy Steel, Lifting Capability For Lifting, Working Load Limit 12,000 lb, Chain Grade 80, Trade Size 1/2 in, Link Inside Length 1 5/8 in, Link Type Straight, Link Inside Width 3/4 in, Overall Length... ... more

ZORO SELECT U17380.000.0350 S Hook,1/2 in. Opening,3-1/2 in.,PK10

S Hook, Material Steel, Finish Zinc, Wire Dia. 0.373 In., Hook Eye Inside H 1 In., Hook Eye Inside W 1 In., Opening Size 1/2 In., Width 1-3/4 In., Overall Length 3-1/2 In., Working Load Limit 160 lb., Package Quantity 10 ... more

ZORO SELECT U08280.025.0250 Lag Screw, 1/4 in, 2-1/2 in, Steel, Zinc Plated Hex

Hex Head Lag Screw, Material Steel, Finish Zinc Plated, Screw Size 1/4 In., Fastener Length 2 1/2 in, Threads per Inch 10, Thread Style Partially Threaded, Minimum Thread Length 1 1/2 in, Dimensional Standards ASME B18.2.1, Pack Size Small, System of... ... more

ZORO SELECT U51900.025.0150 Lag Screw, 1/4 in, 1-1/2 in, 18-8 Stainless Steel,

Hex Head Lag Screw, Material 18-8 Stainless Steel, Finish Plain, Screw Size 1/4 In., Fastener Length 1 1/2 in, Threads per Inch 10, Thread Style Partially Threaded, Minimum Thread Length 1 1/2 in, Dimensional Standards ASME B18.2.1, Pack Size Small,... ... more