You're in Hunting & Archery Equipment
Need a Personal Shopper?
Subscribe to
Bizrate emails for the hottest
deals & products,
PLUS a chance to
WIN $25
sign me up!
New winners chosen weekly.
No purchase necessary.
| Best Seller  | Brownells Carbide Center Drill - #1 Carbide Center Drill 3/64" If none of the common methods for removing a frozen screw work, and drilling is in order, these carbide center drills should be used to center and "start" the hole. With the spindle at fairly high speed, bring the center drill down to the screw head... ... more
Brownells Carbide Center Drill - #1 Carbide Center Drill 3/64" If none of the common methods for removing a frozen screw work, and drilling is in order, these carbide center drills should be used to center and "start" the hole. With the spindle at fairly high speed, bring the center drill down to the screw head... | go to store |
 | Brownells High Speed Countersink - Countersink #3 - 7/64" Drill Diameter 1/4" Body Diameter 60� High speed steel countersinks. Mfg: Brownells SPECS: 60� High speed steel. ... more
Brownells High Speed Countersink - Countersink #3 - 7/64" Drill Diameter 1/4" Body Diameter 60� High speed steel countersinks. Mfg: Brownells SPECS: 60� High speed steel. | go to store |
| Best Seller  | Brownells Carbide Center Drill - #2 Carbide Center Drill 5/64" If none of the common methods for removing a frozen screw work, and drilling is in order, these carbide center drills should be used to center and "start" the hole. With the spindle at fairly high speed, bring the center drill down to the screw head... ... more
Brownells Carbide Center Drill - #2 Carbide Center Drill 5/64" If none of the common methods for removing a frozen screw work, and drilling is in order, these carbide center drills should be used to center and "start" the hole. With the spindle at fairly high speed, bring the center drill down to the screw head... | go to store |
 | Brownells Carbide Center Drill - #4 Carbide Center Drill 1/8" If none of the common methods for removing a frozen screw work, and drilling is in order, these carbide center drills should be used to center and "start" the hole. With the spindle at fairly high speed, bring the center drill down to the screw head... ... more
Brownells Carbide Center Drill - #4 Carbide Center Drill 1/8" If none of the common methods for removing a frozen screw work, and drilling is in order, these carbide center drills should be used to center and "start" the hole. With the spindle at fairly high speed, bring the center drill down to the screw head... | go to store |
 | Brownells Solid Carbide Drill - #28 Solid Carbide Drill Specially ground, single-flute, solid carbide drills ideally suited for use by the professional gun trade on hard receivers (as the 03A3 and harder). Cuts a clean chip in hardest file steel, giving true hole. Does not "crumble out" the steel; thus, no... ... more
Brownells Solid Carbide Drill - #28 Solid Carbide Drill Specially ground, single-flute, solid carbide drills ideally suited for use by the professional gun trade on hard receivers (as the 03A3 and harder). Cuts a clean chip in hardest file steel, giving true hole. Does not "crumble out" the steel; thus, no... | go to store |
 | Brownells Solid Carbide Drill - #31 Solid Carbide Drill Specially ground, single-flute, solid carbide drills ideally suited for use by the professional gun trade on hard receivers (as the 03A3 and harder). Cuts a clean chip in hardest file steel, giving true hole. Does not "crumble out" the steel; thus, no... ... more
Brownells Solid Carbide Drill - #31 Solid Carbide Drill Specially ground, single-flute, solid carbide drills ideally suited for use by the professional gun trade on hard receivers (as the 03A3 and harder). Cuts a clean chip in hardest file steel, giving true hole. Does not "crumble out" the steel; thus, no... | go to store |
 | Brownells Solid Carbide Drill - #29 Solid Carbide Drill Specially ground, single-flute, solid carbide drills ideally suited for use by the professional gun trade on hard receivers (as the 03A3 and harder). Cuts a clean chip in hardest file steel, giving true hole. Does not "crumble out" the steel; thus, no... ... more
Brownells Solid Carbide Drill - #29 Solid Carbide Drill Specially ground, single-flute, solid carbide drills ideally suited for use by the professional gun trade on hard receivers (as the 03A3 and harder). Cuts a clean chip in hardest file steel, giving true hole. Does not "crumble out" the steel; thus, no... | $21.99 $18.99 go to store |
 | Brownells Solid Carbide Center-Cut End Mill Cutters - 3/8" End Mill Center-cut, four-flute design cuts on the side and bottom to save machine time and money; you can make plunge cuts without pre-drilling. All are right-hand helix for right-hand turning equipment. Premium, high feed rate carbide cuts quickly and cleanly... ... more
Brownells Solid Carbide Center-Cut End Mill Cutters - 3/8" End Mill Center-cut, four-flute design cuts on the side and bottom to save machine time and money; you can make plunge cuts without pre-drilling. All are right-hand helix for right-hand turning equipment. Premium, high feed rate carbide cuts quickly and cleanly... | go to store |
 | Brownells Solid Carbide Center-Cut End Mill Cutters - 5/16" End Mill Center-cut, four-flute design cuts on the side and bottom to save machine time and money; you can make plunge cuts without pre-drilling. All are right-hand helix for right-hand turning equipment. Premium, high feed rate carbide cuts quickly and cleanly... ... more
Brownells Solid Carbide Center-Cut End Mill Cutters - 5/16" End Mill Center-cut, four-flute design cuts on the side and bottom to save machine time and money; you can make plunge cuts without pre-drilling. All are right-hand helix for right-hand turning equipment. Premium, high feed rate carbide cuts quickly and cleanly... | go to store |
 | Brownells Solid Carbide Center-Cut End Mill Cutters - 1/4" End Mill Center-cut, four-flute design cuts on the side and bottom to save machine time and money; you can make plunge cuts without pre-drilling. All are right-hand helix for right-hand turning equipment. Premium, high feed rate carbide cuts quickly and cleanly... ... more
Brownells Solid Carbide Center-Cut End Mill Cutters - 1/4" End Mill Center-cut, four-flute design cuts on the side and bottom to save machine time and money; you can make plunge cuts without pre-drilling. All are right-hand helix for right-hand turning equipment. Premium, high feed rate carbide cuts quickly and cleanly... | go to store |
 | Brownells Solid Carbide Center-Cut End Mill Cutters - 1/2" End Mill Center-cut, four-flute design cuts on the side and bottom to save machine time and money; you can make plunge cuts without pre-drilling. All are right-hand helix for right-hand turning equipment. Premium, high feed rate carbide cuts quickly and cleanly... ... more
Brownells Solid Carbide Center-Cut End Mill Cutters - 1/2" End Mill Center-cut, four-flute design cuts on the side and bottom to save machine time and money; you can make plunge cuts without pre-drilling. All are right-hand helix for right-hand turning equipment. Premium, high feed rate carbide cuts quickly and cleanly... | go to store |
 | Brownells Tin Coated Drill - 3/16" Drill TiN COATED DRILL Mfg: Brownells SPECS: Jobber length. ... more
| go to store |
 | Brownells Solid Carbide Ball End Mills - 1/4" Carbide Ball End Mill Four-flute, center-cut design produces smooth cuts and allows plunge cutting to eliminate pre-drilling. Right-hand cut, right-hand helix. Use in right-hand turning equipment. Single-ended. Premium, high feed rate carbide for hardened steels. Mfg:... ... more
Brownells Solid Carbide Ball End Mills - 1/4" Carbide Ball End Mill Four-flute, center-cut design produces smooth cuts and allows plunge cutting to eliminate pre-drilling. Right-hand cut, right-hand helix. Use in right-hand turning equipment. Single-ended. Premium, high feed rate carbide for hardened steels. Mfg:... | go to store |
 | Brownells Solid Carbide Ball End Mills - 5/16" Carbide Ball End Mill Four-flute, center-cut design produces smooth cuts and allows plunge cutting to eliminate pre-drilling. Right-hand cut, right-hand helix. Use in right-hand turning equipment. Single-ended. Premium, high feed rate carbide for hardened steels. Mfg:... ... more
Brownells Solid Carbide Ball End Mills - 5/16" Carbide Ball End Mill Four-flute, center-cut design produces smooth cuts and allows plunge cutting to eliminate pre-drilling. Right-hand cut, right-hand helix. Use in right-hand turning equipment. Single-ended. Premium, high feed rate carbide for hardened steels. Mfg:... | go to store |
 | Brownells Solid Carbide End Mills - 1/8" (3.17mm) Dia. 1.5" (3.8cm) Overall The easiest way to get a good, clean cut in hardened steels. Perfect for altering 1911 slides for low mount style rear. (Cut most of slot with mill, finish with dovetail cutter.) Gives extended tool life when used in softer metals. 3/16" diameter is... ... more
Brownells Solid Carbide End Mills - 1/8" (3.17mm) Dia. 1.5" (3.8cm) Overall The easiest way to get a good, clean cut in hardened steels. Perfect for altering 1911 slides for low mount style rear. (Cut most of slot with mill, finish with dovetail cutter.) Gives extended tool life when used in softer metals. 3/16" diameter is... | go to store |
 | Brownells Hole Center Punches - #10 Hole Center Punch 3 special Center Punches with outside diameters (O.D.) that match the clearance drill size of the most popular sight, rib and scope base mounting screws. Ground, parallel-sided punches reach through even the thickest handgun rib. Ends guess-work and... ... more
Brownells Hole Center Punches - #10 Hole Center Punch 3 special Center Punches with outside diameters (O.D.) that match the clearance drill size of the most popular sight, rib and scope base mounting screws. Ground, parallel-sided punches reach through even the thickest handgun rib. Ends guess-work and... | go to store |
 | Brownells Solid Carbide End Mills - 3/16" (4.7mm) Dia. 2" (5cm) Overall The easiest way to get a good, clean cut in hardened steels. Perfect for altering 1911 slides for low mount style rear. (Cut most of slot with mill, finish with dovetail cutter.) Gives extended tool life when used in softer metals. 3/16" diameter is... ... more
Brownells Solid Carbide End Mills - 3/16" (4.7mm) Dia. 2" (5cm) Overall The easiest way to get a good, clean cut in hardened steels. Perfect for altering 1911 slides for low mount style rear. (Cut most of slot with mill, finish with dovetail cutter.) Gives extended tool life when used in softer metals. 3/16" diameter is... | go to store |
 | Brownells High Speed Countersink - Countersink #1 - 3/64" Drill Diameter 1/8" Body Diameter 60� High speed steel countersinks. Mfg: Brownells SPECS: 60� High speed steel. ... more
Brownells High Speed Countersink - Countersink #1 - 3/64" Drill Diameter 1/8" Body Diameter 60� High speed steel countersinks. Mfg: Brownells SPECS: 60� High speed steel. | go to store |
 | Brownells Solid Carbide End Mills - 1/4" (6.35mm) Dia. 2.5" (6.3cm) Overall The easiest way to get a good, clean cut in hardened steels. Perfect for altering 1911 slides for low mount style rear. (Cut most of slot with mill, finish with dovetail cutter.) Gives extended tool life when used in softer metals. 3/16" diameter is... ... more
Brownells Solid Carbide End Mills - 1/4" (6.35mm) Dia. 2.5" (6.3cm) Overall The easiest way to get a good, clean cut in hardened steels. Perfect for altering 1911 slides for low mount style rear. (Cut most of slot with mill, finish with dovetail cutter.) Gives extended tool life when used in softer metals. 3/16" diameter is... | go to store |
 | Brownells Power Custom Brass Muzzle Crowning Lap - Non-Handled Fits Bore .270-.35 Tip Radius 3/16"(4 Four different sizes of brass laps produce a beautiful, finished crown on all pistol and rifle barrels when used with 600 grit silicon carbide abrasive and your hand drill. Mfg: Brownells SPECS: Brass. 3" (7.62cm) long. Sets include (4) laps, one of... ... more
Brownells Power Custom Brass Muzzle Crowning Lap - Non-Handled Fits Bore .270-.35 Tip Radius 3/16"(4 Four different sizes of brass laps produce a beautiful, finished crown on all pistol and rifle barrels when used with 600 grit silicon carbide abrasive and your hand drill. Mfg: Brownells SPECS: Brass. 3" (7.62cm) long. Sets include (4) laps, one of... | go to store |
 | Brownells Dovetail Scope Base Stock - 0.840" Diameter 3/8" Dovetail Stock 12" lengths of blank Dovetail Scope Base Stock-just the ticket for all those strange and challenging scope mounting jobs your customers just keep bringing in. Simply cut to length, drill and countersink, then refinish exposed ends with our Aluma-Hyde... ... more
Brownells Dovetail Scope Base Stock - 0.840" Diameter 3/8" Dovetail Stock 12" lengths of blank Dovetail Scope Base Stock-just the ticket for all those strange and challenging scope mounting jobs your customers just keep bringing in. Simply cut to length, drill and countersink, then refinish exposed ends with our Aluma-Hyde... | go to store |
 | Brownells Shotgun Bead Facing Cutter - #3 Shank Shotgun Bead Facing Cutter .099" Diameter No more tilted, sloppy looking, half square front sight beads. Faces-off the base of "Bradley"-style (Bev-L-Blok, Raybar, Sunspot, etc.) beads so they end up straight and square to the center of the rib or barrel when tightened. Six-bladed cutter with... ... more
Brownells Shotgun Bead Facing Cutter - #3 Shank Shotgun Bead Facing Cutter .099" Diameter No more tilted, sloppy looking, half square front sight beads. Faces-off the base of "Bradley"-style (Bev-L-Blok, Raybar, Sunspot, etc.) beads so they end up straight and square to the center of the rib or barrel when tightened. Six-bladed cutter with... | go to store |
 | Brownells Power Custom Brass Muzzle Crowning Lap - Non-Handled Fits Bore .38/.357-.41 Tip Radius 1/4 Four different sizes of brass laps produce a beautiful, finished crown on all pistol and rifle barrels when used with 600 grit silicon carbide abrasive and your hand drill. Mfg: Brownells SPECS: Brass. 3" (7.62cm) long. Sets include (4) laps, one of... ... more
Brownells Power Custom Brass Muzzle Crowning Lap - Non-Handled Fits Bore .38/.357-.41 Tip Radius 1/4 Four different sizes of brass laps produce a beautiful, finished crown on all pistol and rifle barrels when used with 600 grit silicon carbide abrasive and your hand drill. Mfg: Brownells SPECS: Brass. 3" (7.62cm) long. Sets include (4) laps, one of... | go to store |
 | Brownells Power Custom Brass Muzzle Crowning Lap - Non-Handled Fits Bore .44-50 Tip Radius 5/16" (7. Four different sizes of brass laps produce a beautiful, finished crown on all pistol and rifle barrels when used with 600 grit silicon carbide abrasive and your hand drill. Mfg: Brownells SPECS: Brass. 3" (7.62cm) long. Sets include (4) laps, one of... ... more
Brownells Power Custom Brass Muzzle Crowning Lap - Non-Handled Fits Bore .44-50 Tip Radius 5/16" (7. Four different sizes of brass laps produce a beautiful, finished crown on all pistol and rifle barrels when used with 600 grit silicon carbide abrasive and your hand drill. Mfg: Brownells SPECS: Brass. 3" (7.62cm) long. Sets include (4) laps, one of... | go to store |
 | Brownells 45� Brass Muzzle Lap - 45�brass Lap Use to polish after using 45� Chamfer Cutters; or for lapping out dings, sharp edges, etc., by itself. Improves accuracy. Use with abrasive paste - like our Silicon Carbide grits - mounted in variable speed electric drill. Made of half-hard brass to... ... more
Brownells 45� Brass Muzzle Lap - 45�brass Lap Use to polish after using 45� Chamfer Cutters; or for lapping out dings, sharp edges, etc., by itself. Improves accuracy. Use with abrasive paste - like our Silicon Carbide grits - mounted in variable speed electric drill. Made of half-hard brass to... | go to store |
 | Brownells Extractor Milling Cutters - 11/64", Slot Width .172" Carbide, center-cutting, four-flute mills precisely cut the groove necessary to install a Sako extractor on your Remington bolt for positive, reliable extraction. High-cobalt content improves feed rates for fast cutting. Order the cutter that matches... ... more
Brownells Extractor Milling Cutters - 11/64", Slot Width .172" Carbide, center-cutting, four-flute mills precisely cut the groove necessary to install a Sako extractor on your Remington bolt for positive, reliable extraction. High-cobalt content improves feed rates for fast cutting. Order the cutter that matches... | go to store |
 | Brownells Extractor Milling Cutters - 15/64", Slot Width .231" Carbide, center-cutting, four-flute mills precisely cut the groove necessary to install a Sako extractor on your Remington bolt for positive, reliable extraction. High-cobalt content improves feed rates for fast cutting. Order the cutter that matches... ... more
Brownells Extractor Milling Cutters - 15/64", Slot Width .231" Carbide, center-cutting, four-flute mills precisely cut the groove necessary to install a Sako extractor on your Remington bolt for positive, reliable extraction. High-cobalt content improves feed rates for fast cutting. Order the cutter that matches... | go to store |
 | Brownells Extractor Milling Cutters - 5/32", Slot Width .152" Carbide, center-cutting, four-flute mills precisely cut the groove necessary to install a Sako extractor on your Remington bolt for positive, reliable extraction. High-cobalt content improves feed rates for fast cutting. Order the cutter that matches... ... more
Brownells Extractor Milling Cutters - 5/32", Slot Width .152" Carbide, center-cutting, four-flute mills precisely cut the groove necessary to install a Sako extractor on your Remington bolt for positive, reliable extraction. High-cobalt content improves feed rates for fast cutting. Order the cutter that matches... | go to store |
 | Brownells 1911 Lug Fitting Kit - 1911 Lug Cutter Handle Only Three essential tools work together to help you successfully fit oversized barrels. The Barrel Holder locks the barrel in the slide to let you cut the excess material on the lugs with the included, carbide Barrel Lug Cutters. Plus, the Slide Pusher... ... more
Brownells 1911 Lug Fitting Kit - 1911 Lug Cutter Handle Only Three essential tools work together to help you successfully fit oversized barrels. The Barrel Holder locks the barrel in the slide to let you cut the excess material on the lugs with the included, carbide Barrel Lug Cutters. Plus, the Slide Pusher... | go to store |
 | Brownells Fillister 8-40 Sight Screw Counterbore Overall 2�" (6.3mm); Body Dia. .250" (6.3mm); Pilot Dia. .165" (4.2mm); Pilot Length 1⁄8" (3.2mm); 90� Shoulder. Use Drill No. 19 for Pilot Hole. Mfg: Brownells ... more
Brownells Fillister 8-40 Sight Screw Counterbore Overall 2�" (6.3mm); Body Dia. .250" (6.3mm); Pilot Dia. .165" (4.2mm); Pilot Length 1⁄8" (3.2mm); 90� Shoulder. Use Drill No. 19 for Pilot Hole. Mfg: Brownells | go to store |
 | Brownells 1911 Lug Fitting Kit - 1911 Barrel Holder Three essential tools work together to help you successfully fit oversized barrels. The Barrel Holder locks the barrel in the slide to let you cut the excess material on the lugs with the included, carbide Barrel Lug Cutters. Plus, the Slide Pusher... ... more
Brownells 1911 Lug Fitting Kit - 1911 Barrel Holder Three essential tools work together to help you successfully fit oversized barrels. The Barrel Holder locks the barrel in the slide to let you cut the excess material on the lugs with the included, carbide Barrel Lug Cutters. Plus, the Slide Pusher... | go to store |
 | Brownells Weaver 8-40 Sight Screw Counterbore Overall 2�" (6.3mm); Body Dia. .250" (6.3mm); Pilot Dia. .165" (4.2mm); Pilot Length 1⁄8" (3.2mm); 45� Shoulder. Use Drill No. 19 for Pilot Hole. Mfg: Brownells ... more
Brownells Weaver 8-40 Sight Screw Counterbore Overall 2�" (6.3mm); Body Dia. .250" (6.3mm); Pilot Dia. .165" (4.2mm); Pilot Length 1⁄8" (3.2mm); 45� Shoulder. Use Drill No. 19 for Pilot Hole. Mfg: Brownells | go to store |
 | Brownells Semi-Auto Pistol Compensator Tap - .575"-40 Tap Use die to thread custom and standard barrels to accept recoil compensators. Use plug tap to chase threads or tap your own custom compensators. Unthreaded comps should be drilled with 3-5/64" HSS drill then reamed to .551" before threading with either... ... more
Brownells Semi-Auto Pistol Compensator Tap - .575"-40 Tap Use die to thread custom and standard barrels to accept recoil compensators. Use plug tap to chase threads or tap your own custom compensators. Unthreaded comps should be drilled with 3-5/64" HSS drill then reamed to .551" before threading with either... | go to store |
 | Brownells Semi-Auto Pistol Compensator Tap - .578"-28 Tap Use die to thread custom and standard barrels to accept recoil compensators. Use plug tap to chase threads or tap your own custom compensators. Unthreaded comps should be drilled with 3-5/64" HSS drill then reamed to .551" before threading with either... ... more
Brownells Semi-Auto Pistol Compensator Tap - .578"-28 Tap Use die to thread custom and standard barrels to accept recoil compensators. Use plug tap to chase threads or tap your own custom compensators. Unthreaded comps should be drilled with 3-5/64" HSS drill then reamed to .551" before threading with either... | go to store |
Ads related to Brownells Carbide Center Drill - #3 Carbide Center Drill 7/64"
